Caries screening via dental light equipment for illuminating traces of bacteria in the oral cavity that leads to carries.
1.After removing the device from the charging stand, attach the light guide tip to the top of the device.
2.After removing the protective cap from the end of the light guide tip, press the power button to turn on the power.
-Press any button among the power/mode (M)/light output start (S) buttons to turn on the power.
3.Press the mode button to select the desired mode (Hi/Normal).
-The mode changes each time you press the button.
4.Once the desired mode is selected, press the light output start (S) button to activate the light source for examination. Once pressed it will stay on for 60 seconds.
-During 60 seconds, the mode (M) button is disabled.
5.After the light is on, pressing the light output start (S) button will stop the light examination.
-After stopping the light, the timer will reset (60 seconds) upon restarting.
6.After use, press the power button on the main unit for 3 seconds to turn off the power.
-Note : If no buttons are pressed, the power of the main unit will automatically turn off after 2 minutes.
7.After confirming that the main unit is powered off, please attach the protective cap to the end of the optical guide. Then place on the charging stand.
